ACP
This is an abbreviation for “Automatic Colt Pistol,” which is a caliber specification of a handgun (H*G) cartridge. The term originates from the auto-loading Colt Firearms pistols designed by John Browning in the early 20th century.
action
The operating mechanism (PHEFPL) on a firearm that presents the cartridge for firing, removes the used casing and introduces the new cartridge. Bolt-action, lever-action, and pump-action are all examples of action types.
ammunition – A*PLGS
Also referred to as “ammo” and measured in rounds, ammunition is what is loaded into a firearm. It’s made up of multiple parts, including gunpowder, primer, and a projectile wrapped in a casing.
AR
Although this term is sometimes incorrectly used as the abbreviation for “assault rifle,” it actually means “ArmaLite Rifle” and most commonly refers to the AR-15 rifle.
assault rifle – SAULT/RAO*EUFL
Often used by the military (PHEULT) or police, this is the technical term for a selective-fire rifle that fires reduced-power ammunition from a detachable magazine. Examples of an assault rifle include the AK-47 and M16 models.
automatic - AOBG
An automatic firearm chambers, fires, and ejects multiple cartridges with a single pull of the trigger. Also referred to as a “machine gun,” it will continuously fire rounds as long as the trigger is engaged and the magazine has ammunition. This type of gun is strictly regulated by the federal government.
ballistics - PWHREUFBGZ
The science of cartridge (KARPBLG) discharge through an examination of the launch, flight path, behavior, and projectile effects of a bullet and its casing.
barrel
This term refers to the long tube-shaped part of a firearm. It provides an exit path with direction and velocity for a discharging bullet.
black powder
Also known as gunpowder, black powder differs from smokeless powder because it creates a larger amount of smoke when ignited. It’s also less powerful than smokeless powder and produces more fouling.
blank
As the name suggests, there is no bullet in a blank. Instead, the round is loaded with black powder so the gun will still fire. Blanks are often used on film and TV sets, to start a race, and for military training.
bolt action
This is a type of action that fires one round at a time. After the bullet is fired, the empty shell is unloaded by the user manually pulling back on the bolt before loading another round into the chamber.
bore – PWOR
Derived from the process used to make a barrel, this term refers to the interior of the gun barrel. A special drill is used to carve a hole inside a solid bar stock to make the bore. It can also be used to describe some sizes of shotgun shells.
breech – PWRAOEFP – different from breach PWRAEFP
This is the portion of a gun’s barrel behind the bore. Depending on the model, a gun’s breech may contain the chamber or just the back of the barrel.
breech face marks
These marks come from the breech face area of the firearm. This is the portion of the firearm that supports the cartridge when loaded in the chamber. After the cartridge powder is ignited by the firing pin striking the primer cup, tremendous pressure is exerted in the chamber of the firearm, forcing the back of the cartridge case against the breech face.
buckshot
Often used for hunting large animals, this is ammunition for shotguns that have medium or large pellets that burst when fired. Buckshot pellets are around .24” in diameter, creating a bigger impact on the target. For hunters, that means a buckshot has the intensity to kill the animal quickly.
bullet - PWAOULT
This is the metal projectile portion of a cartridge or round that is propelled through a gun’s barrel to hit a target. A bullet is generally cylindrical in shape with one rounded end.
casing
This is the container portion of a cartridge or round. It holds the gunpowder, projectile, and a primer in the casing unit. For rifles and handguns, casings are usually metal. Plastic casings or “shells” are made for shotguns.
caliber – KHR-B
The caliber of a gun refers to the diameter of the inside of the gun’s barrel, also known as the bore. The caliber determines the ammunition size that the gun can fire. It is measured in fractions of an inch (.45 caliber) or in millimeters(M*MTS) (9 mm).
chamber
This refers to the portion of the barrel where the cartridge is seated before firing the gun. Rifles and pistols both have single chambers within the barrel. Revolvers have multiple chambers.
choke
This is when the diameter at the end of a shotgun barrel is reduced to alter the spread of a shot as it leaves the gun.
clip
Often confused with a magazine, a clip holds cartridges or rounds together and is used to either reload magazines (stripper clip) or is inserted into the firearm directly (en bloc clip).
cock
The act of manually drawing back the hammer of a gun against its spring. This action arms the hammer to release when the trigger is pulled. Some firearms with internal hammers are cocked automatically when the shooter pulls the trigger.
cylinder
Found only in revolvers, this is the portion of the gun containing multiple chambers. The cylinder rotates so each cartridge aligns with the barrel before firing.
double action
This refers to a long pull on the trigger that both cocks and releases the hammer to fire either a revolver or pistol. The hammer can also be cocked manually, requiring only a short pull on the trigger to fire the weapon.
double-barreled shotgun
A shotgun with two barrels rather than just one. The barrels can either be side by side (SxS) or one over the other (O/U). The barrels are most commonly the same sized bore.
double stack
This semiautomatic (SPHAOBG) pistol magazine holds cartridges in two vertical lines, side by side, with a tapered top, so only one cartridge is fed into the chamber at a time.
double tap
Two shots fired rapidly back to back in succession. Typically, the shooter doesn’t aim at another target between shots.
dummy
A round of ammunition that is completely inert and has no explosive (SKPHROEF) charge, unlike a blank. Dummy rounds are most often used for training exercises.
ejector
A gun’s mechanism (PHEFPL) that releases or “kicks” the spent case from the chamber.
extractor
A gun’s mechanism that pulls cases from the chamber after the ammunition has been fired.
firearm
According to the federal government definition, a firearm is a rifle, shotgun, or handgun that uses gunpowder as a propellant. The act of combustion (KPWUGS) must be present for the device to be considered a firearm.
firing pin
The firing pin is directly behind a chambered cartridge of a hammer-fired gun. When the hammer strikes the firing pin, it impacts the cartridge’s primer cap to discharge the weapon.
flash suppressor
This attachment lessens the flash of light as a round exits a gun’s barrel by allowing hot air and gas to escape. It attaches directly to the end of a firearm’s barrel.
fouling
A layer of buildup that accumulates in a gun’s bore as a result of the firing process. Mostly made of carbon, lead, copper, and wax, it can interfere with a gun’s accuracy if not cleaned out regularly.
gauge
Similar to calibers of handguns and rifles, this term is used to reference the bore size of a shotgun.
Glock
This is a series of popular semiautomatic, short recoil-operated pistols designed and produced by the Austrian company, Glock Ges.m.b.H. Although this term is sometimes incorrectly used as slang for any handgun, it should only be used when referring to the Austrian branded pistols. Other slang – glizzy, glick
grain
This term is used as a unit of measurement that defines the weight of a bullet or the amount of powder in a single cartridge. One pound is equal to 7,000 grains.
grip
The grip of a gun refers to the handle
of a handgun or side panels of the gun’s handle. (Tricky - Hogue grip - not HOE GRIP)
gunpowder
Also referred to as “black powder,” this is the component of ammunition that is used as a propellant in firearms.
gunshot residue – also known as GSR
During the discharge of a firearm, escaping gases from the weapon deposit gunshot residue (GSR) on the skin of the shooter’s hands, on the clothing of the shooter, and on other objects located in close proximity to the shooter. Analysis and characterization of the residue for the trace elements (lead, barium, and antimony) are used to indicate if a suspect has fired, handled, or been in close proximity to a weapon when it was fired.
hair trigger
A reference to a trigger that can be pulled with very little pressure from the shooter (SHAORT) and requires steady hands.
hammer
This is the part of the firearm that releases from its spring when the trigger is pulled. It impacts the firing pin to discharge the weapon.
headspace
This refers to the distance measured from the portion of the chamber that stops a cartridge’s forward motion to the face of the bolt.
hollow point
In order to increase expansion upon penetration of a target, a hollow point bullet has a concave nose. It generally does more internal damage to a target.
IBIS/NIBIN
The Integrated Ballistic Identification System (IBIS) is used to potentially associate evidence in previously unlinked crimes. IBIS is a highly technical, computerized image analysis system that records images from bullets and cartridge cases and compares them to a national database of images called the National Integrated Ballistic Information Network (NIBIN).
iron sights
Constructed primarily of metal, this refers to a non-optical sight.
kick
This term is often used to describe the recoil created when a firearm is discharged. The kick is the backward momentum felt by the shooter.
lever action
With this firearm action, the shooter uses a manually cycled lever to extract a spent casing and load a fresh cartridge into the chamber. In other words, it is not a semiautomatic action.
machine gun
Another term for an automatic firearm, machine guns will fire multiple cartridges with just a single pull of the trigger.
magazine - PHAG
This is the unit that contains the cartridges before they are fed into the chamber of the gun. The term “clip” is sometimes incorrectly used interchangeably with this term. However, they are not the same. Generally, a clip feeds the magazine, which then feeds the gun.
magnum
A term used to describe a cartridge with a higher-velocity load or a heavier projectile when compared to the standard cartridge.
misfire
This describes the times when the primer in a cartridge fails to ignite and a bullet does not fire.
muzzle
This is the term for the end of a gun’s barrel. The muzzle is where the projectile exits the firearm.
neck
The portion of the cartridge casing that grips the bullet.
pistol – PEUFL or P*EUFL
Also referred to as a “handgun,” pistols are smaller firearms designed so a shooter can fire it using one hand, although many shooters will use two hands. These guns are portable and easily concealed.
pistol grip
An attached handle found on rifles or shotguns just behind the trigger that resembles that of a pistol.
point blank (often hyphenated)
When a gun is fired directly at a target from an extremely close range.
recoil
Also referred to as a gun’s “kick,” this is the backward momentum or force exerted by a gun as it fires.
revolver – RO*FRL
This is a general term used for a pistol or handgun that has a multi-chambered cylinder that rotates to align a cartridge with the gun’s barrel before firing.
rifle – RAO*EUFL
Fired from the shoulder, rifles have a long barrel when compared to a handgun. It is most often used for shooting that requires more precision.
rifling
The spiral pattern of grooves found in a rifle’s barrel or bore, which creates a spin on the projectile. This helps stabilize the bullet and improve accuracy.
round
The term used for a single cartridge or one unit of ammunition.
safety
A firearm mechanism designed to prevent a gun from being fired by restricting the gun’s trigger. With modern firearms, a gun’s safety should always be engaged until a shooter is ready to fire the weapon.
scope
A tube attached to the top of a firearm that magnifies the target so a shooter can fire accurately from a distance.
shells
This is a slang term for leftover round casings. However, it is also used to reference shotgun ammunition.
shotgun (SH*G)
A type of long firearm that fires small groups of pellets or large slugs housed in a shell rather than a single bullet.
sight (SAOEUGT)
A sight is an aiming device (TKWAOEUS) used to assist in visually aligning ranged weapons with the intended target.
silencer (SAOEULS/ER)
A common name for a suppressor, this mechanism is attached to a gun’s barrel to significantly reduce the sound a gun makes when fired.
smokeless powder
Producing less smoke than traditional black powder, this powder is considered safer and more potent in comparison.
stippling
Stippling is burning of either clothing or skin by the gunpowder which fires out of the gun along with the bullet.
toolmarks
Toolmarks are scratches and/or impressions that are left on an object that is softer than the object or tool that caused the marks. (Sometimes I've seen it one word and sometimes I've seen it two words.)
trajectory – TR-PBLG
When used in reference to firearms, this describes the arc of the bullet as it exits a gun’s muzzle to impact the target.
trigger - TREURG
This is the actual release device of a firearm that initiates the firing sequence of a gun. Most commonly, a gun’s trigger is a small, curved lever that is pulled backward with the shooter’s pointer finger.
slang
terms - chop, chopper, strap, glick, glizzy, and probably many more...
*Typically, I use an asterisk in a lot of my weapons because I may have another entry that without the asterisk would be a conflict. I picture the asterisk as the bullet. :)
